Product Overview
| Refrigerant |
R717, R507, R744, etc. |
| Tube and Fin material corresponding to heat exchange medium |
Stainless Steel Tube and Aluminum Fin (ammonia, carbon dioxide, glycol, etc.)
Aluminum Tube and Aluminum Fin (ammonia)
Copper Tube and Aluminum Fin (fluorine)
Steel Tube and Steel Fin (ammonia, due to the environmental impact of the galvanizing process, the production of product made of this material has been strictly controlled) |
| Energy Saving |
-High heat transfer efficiency
-Optimal operating efficiency
-Help customers save operating cost |
| Ensure Products Quality |
-Reduce dry consumption of products and maintain their quality
-Design for disassembly, easy cleaning and ensuring sanitation |
| Security |
-Factory test-conducting the air tight test.
-good corrosion resistance |
| Installation Form |
ceiling type, floor type, warehouse type, loft type, etc. |
| Liquid supply |
pump supply, gravity |
| Heat Exchange Area |
110-715 m2/ table (customized non-standard equipment is optional) |
Detailed Photos
Product category
- Refrigerant: Ammonia
- Material of pipe segment: overall hot-dip zinc steel pipe segment, or aluminum pipe segment
- Structure form of installation: ceiling mounted, floor-assembled, Splicing assembled
- Needed wind outer direction: induced type and pressure type
Product structure
Enclosure
The enclosure is made of high quality galvanized steel plates and has very good corrosion resistance. The air port is stretched by the fan base plate into a bell mouth, thus not only increasing the rigidity of the air port but also ensuring smooth air flow and small resistance loss.
Coil
- Aluminum tubes and aluminum fins are characterized by light weight and fast heat conduction. Imported special equipment is used for expanded connection of fins with heat exchange tubes, and they are in tight contact, thereby realizing small thermal contact resistance and high heat exchange efficiency.
- Steel tubes and steel fins are hot-dip galvanized integrally, have strong corrosion resistance and can obtain longer service life. Fins and heat exchange tubes are treated using integral hot-dip galvanizing process and the zinc coating thickness is
0.06-0.10mm, so that they from an integral heat exchanger component. In addition, optimize tube inside design, reduce resistance and ensure very high heat transfer efficiency.
The fin combination mode with constant fin spacing and variable fin spacing is used, thus better developing the heat transfer efficiency of the air cooler in various environment. The frame of coil is hot-dip galvanized integrally and thus has high strength and good corrosion resistance.
Fin
Fins have large size and wavy form integrally, thus realizing high heat exchange efficiency and also making for sanitary disposal. Aluminum fins use the fin form combining stretched and heightened neck rings with constant fin spacing; steel fins use a special coronal structure for constant spacing so as to ensure accurate positioning of fins.
Axial fan and motor
The screen-protected axial fan is characterized by high efficiency, wide optional
range of air quantity and wind pressure, stable operation and low noise. The blades of the fan are made of die-casting aluminum alloy, thus realizing both light weight and good corrosion resistance. The new blade design makes aerodynamic performance better. The protective level of the fan motor is IP55 and its applicable temperature range -40ºC -40ºC .
Cooling tank and water pan
Both the cooling tank and the water pan are made of high quality galvanized steel plates and have very good corrosion resistance. The cooling tank designed with a mesh water spraying mode is characterized by uniform water spraying, no blind area, high defrosting speed and small water consumption. The water pan is demountable, thus making for cleaning and ensuring sanitation. The shielding board between the cooling tank and the water pan effectively prevents water from splashing outside.
Model description
Outside drawing of DAA series high-efficiency ceiling-mounted air cooler, aluminum tubes and aluminum fins (two fan)
Successful Case
Company Profile
MOON ENVIRONMENT TECHNOLOGY Co., Ltd was founded in 1956 and listed in Shenzhen stock exchange in 1998 with stock code 000811. Now Moon-tech is the largest base of R&D and export for refrigeration & air-conditioning equipment in China. Since its establishment, Moon-Tech has been committed to innovate refrigeration technology and provide our customers with high quality equipment & solutions. Being a responsible enterprise, Moon-Tech always pays close attention to harmonious development between human beings and nature, and the whole design and manufacturing process of our products is guided by principle " environmental protection, energy saving and safety".
Our mission: Constantly create value for customers.
As a leading company in Chinese refrigeration industry, Moon-Tech has been keeping paces with the world latest technology in order to provide stable, low maintenance and high quality equipments in food processing, low temperature cold storage, petrochemical, semiconductor, chemical industry, hydroelectricity, coal industry etc.
In food cold chain field, Moon-Tech holds more than 60% domestic market share. In overseas market, more than 400 customers from 80 countries and regions have benefited from our products and after sale services.
Moon-Tech, a leading refrigeration company is your ideal partner in temperature control field!
Factory Tour
Certifications
Why choose us
1.Based on own factory, our price is below the market average price with quality guarantee.
2.Professional Service TeamWe have excellent sales men and technicians to quickly solve your problems quickly and in a timely manner.
3.Flexible Payment TermsWe supply flexible payment terms such as T/T, D/P, L/C at sight, Usance L/C.
4.Large StockWe have large stock of products for your emergency need.
5.Shorter Delivery PeriodWe have complete production capacity to satisfy your delivery requirement.
FAQ
1.What's your advantage?
A: Honest business with competitive price and professional service on export process.
2.How I believe you?
A : We consider honest as the life of our company, we can tell you the contact information of our some other clients for you to check our credit. Besides, there is trade assurance from Alibaba, your order and money will be well guaranteed.
3.Can you give warranty of your products?
A: Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service.
4.Where are you?
Can I visit you? A: Sure,welcome to you visit our factory at any time.
5.How about the delivery time?
A: Within 15-35 days after we confirm you requirement.
6.what kind of payment does your company support?
A: T/T, 100% L/C at sight, Cash, Western Union are all accepted if you have other payment,please contact me.
Audited Supplier 
){kind=link}
){kind=link}